Clipsal Software Downloads

C-Bus

• 5-14-09 - C-Bus Calculator enables the designer of any C-Bus Network to confirm that the critical network operating parameters are within acceptable limits. - C-BUS_Calculator_V2-2-0.zip

• 5-14-09 - C-Bus Calculator Set-up enables the designer of any C-Bus Network to confirm that the critical network operating parameters are within acceptable limits. - Calculator_2_7_0_Setup.zip

• 1-27-10- C-Bus Diagnostic Software can be used for diagnosing problems with C-Bus installations. - CBusDiagnostic_2_0_0_Setup.zip

• 4-03-08 - C-Bus Drawing Templates are in the following formats: AutoCad Templates (DWG) and Visio Stencils (VSS) - DrawingTemplates_1_0_1.zip

• 2-17-10 - C-Bus Infrared Commissioning Software (CIRCA) is used to commission C-Bus IR Devices. Software allows the user to select IR codes and assign them to particular output channels on an IR Device and make associations b/w IR codes and C-Bus events. - CIRCA_2_6_0_85.zip

• ARCHIVE: C-Bus Infrared Commissioning Software (CIRCA) version 2.5.1 - Circa_2_5_1.zip

• 2-17-10- C-Bus IP Utility software is used for configuring IP based C-Bus devices, such as the C-Bus Network Interface (CNI). - CBusIPUtilitySetup_1_1_0.zip

• ARCHIVE: C-Bus IP Utility software version 1.0.0 - CBusIPUtilitySetup_1_0_0.zip

• 3-31-10- C-Bus Toolkit software is an application you run on your personal computer to configure and commission C-Bus Installations. - CBusToolkit_1_11_1_Full.zip

• ARCHIVE: C-Bus Toolkit software version 1.10.9 - CBusToolkit_1_10_9_Full.zip

• 4-03-08 - C-Gate Documentation User Guide gives basic information about installing and operating the C-Gate Server. - CGateServerGuide_1_0.zip

• 4-03-08 - DLT Simulator is a stand-alone tool that allows users to create customized bitmap pictures of 'real' DLT LCD screens, for inclusion in specifications or as-built documents. Tool is unsupported and is not linked to Toolkit or Clipsal software. - DLT_Simulator_1_0_0.zip

• 4-08-10- Home Gate software provides a powerful and simple to use interface to C-Bus via a standard PC, with the ability to tailor the appearance and operation of the user interface to a residential client's requirements. - HomeGate_4_8_3_Setup.zip

• ARCHIVE: Home Gate software version 4.8.0 - HomeGate_4_7_2_Setup.zip

• 4-03-08 - IR Reader is used to learn IR commands from remote controls to use with the Marpa software. - IRReader_1_2.zip

• 4-03-08 - Lantronix Device Installer provides users a single applications with a graphical interface and utilizing Microsoft's .NET Framework to access various configuration functions for Lantronix networking products. - Lantronix_Dev_Installer_36.zip

• 2-17-10 - The Multi Room Audio Rapid Programming Application (MARPA) is used to configure the Multi Room Audio Matrix Switcher. - MARPA_3_0_0.zip

• ARCHIVE: Multi Room Audio Rapid Programming Application (MARPA) software version - Marpa_2_0_0.zip

• 4-08-10- PICED software is used to configure the following products: Monochrome Touch Screen, Color Touch Screen, Pascal Automation Controller (PAC). - PICED_4_8_3_Setup.zip

• ARCHIVE: PICED software version 4.8.1 - PICED_4_7_2_Setup.zip

• 4-08-10- Schedule Plus software provides a powerful and simple to use interface to C-Bus via a standard PC, with the ability to tailor the appearance and operation of the user interface to a commercial or industrial client's requirements. - Schedule_Plus_4_8_3_Setup.zip

• ARCHIVE: Schedule Plus software version 4.8.0 - Schedule_Plus_4_7_2_Setup.zip

• 2-17-10 - The Telephone Interface Commissioning Application (TICA) is used to configure the C-Bus Telephone Interface (CBTI). - Tica_3_1_0_English.zip

• ARCHIVE: Telephone Interface Commissioning Application (TICA) software version 3.0.0 - Tica_3_0_0_English.zip

• 4-03-08 - TICA - Telephone Interface Users Guide - TICA_3_0_0.pdf